Find Keystone Jack, Rj45 Cat6 Keystone Jack, Rj45 Keystone Jack on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Telecom Solution > Telephone Modules > 10 pair Distribution Module

10 pair Distribution Module

Product Description

Specifications 1.10 pair Distribution Box krone type

2.for clicking onto back -mounting frame

3.two pieces IDC contacts normally close

10 pair distribution box Specifications:
Environment
Environment condition (-40°C ——90°C)
operation condition (-20°C —80°C)
Atmospheric pressure 70-106KPa
Relative humidity <85% (30°C)
Mechanical Specifications
Pulling-out force ≥25N
Diameter of connection wire 22AWG-26AWG
Insulation resistance ≥10GΩ
Intermediate resistance  between the reed terminators             ≤7mΩ
contact resistance ≤1mΩ
Dielectric strenght 2 kVeff
Impulse voltage resistance 3.6kV(8/20)
operating voltage for basic insulation 210Vdc, 150VeffTNV
Pollution class II
Insulation material class I
Transient overvoltage for basic insulation 2.5kV
current carring capacity                          disconnection module                                                                     connection module                                    10kA                                         5kA
IDC retermination ≥200
Number of test cord insertions ≥750
Transmission performance  ≥TIA 568B CATEGORY 5
Material and package
Plastic components 
ABS or PBT(UL94V-0)                   
contact material Phosphor bronze
contact plating Silver
specification 10 pairs
IDC type  disconnection types
Dimension(HxWxD)  123.5x21.5x40.5mm
package and size 10 pcs/box               300 pcs/carton                   58x28x28CM
10Pair Disconnection Module
1)for clicking onto back -mounting frame
2)two pieces IDC contacts normally closed. 10 pair disconnection module   1.Environment condition: -5-40 degree Celsius ;Relative humidity <85% (+30 degree Celsius);Atmospheric pressure: 70-106KPa ;
2.The modules are compatible with KRONE LSA-PLUS modules. The design of contacts basing on the principle of airtight contacting makes a completely reliable connection between the contacts and wires
3.Pulling-out force: tin bronze and silver plating (20-40 uinch), pulling-out force not less than 25N ;
4.Internal diameter of connection wire: 0.4-0.6 mm
5.The performance of anti-burn: PBT (UL94V-0)or anti-burn ABS (UL94V-0),Combustibility achieved GB/T 5169.7-1985 standard ;
6.Insulated resistance: under standard atmospheric pressure ,Insulated resistance no less than 1,000M ohm between the two disjunct connections ;
7.Intermediate resistance between the reed terminators: no more than 7m ohm between intermediate reed under the standard examination condition ;
8.Intermediate resistance: no more than 3m ohm under standard examination condition ;
9.Dielectric strength: according to industry standard
10.Specification:10 pairs, 8 pairs, 5 pairs
11.Type: disconnection types and connection types
12.insertion Life:  0.350.65mm conductor:     200 times   0.8mm conductor    50 times  

Contact us if you need more details on 10 Pair Distribution Module. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 10 Pair Disconnection Module、10 Pair Distribution Module. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Telecom Solution > Telephone Modules