PVC Spiral Vibration Damper for Overhead Line Insulators
Product Description
PVC Spiral Vibration Damper for Overhead Line Insulators
Spiral vibration damper guy grip for stay wire using its anti-vibration part to produce antihunt action to the wind vibration, consuming the vibration energy that produced by the cable running under the action of laminar wind,to prevent the destruction of gold tool and Fiber Optic Cable,whcih mainly used for ADSS and OPGW cable. Preformed guy grips quality is good.
Preformed Guy Grip Material : PVC
Type | Diameter of Cable(mm) | Length of Clamping Part (mm) | Total Length (mm) | Net Weight (kg) | Color Code |
1 | 8.30 - 11.70 | 250 | 1300 | 0.28 | Yellow |
2 | 11.71 - 14.30 | 250 | 1350 | 0.3 | Green |
3 | 14.30 - 19.30 | 330 | 1670 | 0.66 | Blue |
(2) The clamping end of the plastic damper should be close to pole or tower, and the distance is about 12cm from the end of calmping part to the end of the dead-end grip or the armor rod of suspension clamp.
(3) The quantitis needed are according to the running tesnsion and span of the cable showing as following:
Span | Quantity Using |
< 100 m | 0 |
100 - 250 m | 2 |
250 - 400 m | 4 |
400 - 800 m | 6 |
Our Services
1. Small Orders Accepted2. Fast producing time, Prompt Delivery
3. International Approvals
4. Reply promptly in 24 hours
5. Best Price
FAQ:
1. Q: How about payment terms?A: 30% TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment can be negotiated.
2. Q: Do you have some videos where we can see the line producing?
A: Yes, we can provide some videos for reference.
3. Q: Are you a Manufacture Factory?
A: Yes. We are the direct manufacture factory, and our factory has specialized in porcelain insulator,composite insulator,glass insulator,arrester, cold and heat shrinkable tube,cut out fuse and power fitting ,etc.
4. Q: How long is producing time ?
A: Normally it will take about 30 days for production.
5. Q: What is the standard of package ?A: For small capacity, we use carton, but for big capacity, we will use strong wooden case for protection or double inner packs in a master carton.
6. Q: How do you make sure your good quality ?
A: We use the best raw material , and every single product will go through a series of strict test.
We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.
Contact us if you need more details on Guy Grip for Stay Wire. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Preformed Guy Grip Material、Preformed Guy Grips Quality. If these products fail to match your need, please contact us and we would like to provide relevant information.Product Categories : Power Fitting > Power Line Accessories